

ZW-A12 Automatic sheets feeding paper bag making machine

Machine Feature:
1. The material used for the equipment can be 180-300 grams of white cardboard.
2. The materials used in this device can save 6% compared to traditional paper bag machines, greatly reducing material costs.
3. The size range of side width specifications can range from 80mm to 300mm.
4. This device can be replaced with different specifications according to needs. Each replacement of one size and debugging time actually takes less than 40 minutes, which is simple and convenient to meet the production needs of various specifications.
5. The bottom of the paper bag produced by this equipment has the special feature of flat sheet, which compensates for the defect of traditional paper bag degumming and bottom leakage.
6. The paper bags produced by this device have a wide surface without waistline creases, greatly improving the overall aesthetics and cleanliness of the paper bags.
7. This device has a fully automatic rope threading function, reducing labor costs.

 0086-13967728010

Inquiry

DESCRIPTIONVideoFAQ

At present, the market demand for large weight (over 180 grams), large face width, large side width, and some small quantities of square bottomed paper bags is mostly in semi-automatic manual production. And currently, paper bags are all edge sealed and bottom folded before bonding, with the bonding part located at the bottom where the paper bag is most stressed. During use, the bottom is prone to delamination and cannot be used properly.

This equipment is designed based on the new U-shaped packaging technology for the middle seals on both sides. The bottom of the finished bag is a whole, with overlapping middle seals on both sides. In a flat state, both sides are folded inward, while the bottom is folded inward. There are no folding lines or bonding points on the surface, making the appearance of the bag more beautiful and overall.

This device is controlled by a fully servo bus, with a simple and intelligent operating interface. Most of the adjustment stations are already mechatronic and can be automatically adjusted according to the bag specifications, greatly reducing the difficulty and time of adjustment. According to the production plan, the changes in bag specifications and sizes have reached 90% automation adjustment. The debugging time for changing specifications has been compressed to within 40 minutes, and the operation is simple with a low waste rate.

Technician Parameter：

Small size machine:

Power	380v
Material	White cardboard, white cow paper, gold and silver cardboard (sheet)	Average power	40KW
Material thickness	160-300g	Production speed	35-45pcs/min
Bag height	170-400mm	Bag front width	160mm-450mm
Bag side width	80-200mm	Weight	7500kg
Bag opening patch thickness	150-300g	Handle rope	360-430mm
Sheets size(L)	520-1080mm	（Bag height+Bag height+Side width+80）
Sheets size(W)	270-680mm	（Front width+Side width+15mm）
Installation	8m(L) x 6.2m(W) x 2.2m(H)

Big size machine:

Power	380v
Material	White cardboard, white cow paper, gold and silver cardboard (sheet)	Average power	40KW
Material thickness	180-350g	Production speed	35-40pcs/min
Bag Height	260-450mm	Bag front width	260mm-550mm
Bag Width	120-300mm	Weight	8000kg
Bag opening patch thickness	150-300g	Handle rope	360-500mm
Sheets size(L)	720-1280mm	（Bag height+Bag height+Side width+80）
Sheets size(W)	410-865mm	（Front width+Side width+15mm）
Installation size	12m(L)x 6.2m(W) x 2.5m(H)

ZW-A12 Configuration:

Spare	Model	Power	Quantity	Brand
PLC	FD-XHC60T		5	Panasonic
Handle sealing unit	NS-C1615		2	Panasonic
Touch screen(Big)	TK6100i		1	Weilun
Touch screen(Small)	TK6070iq		3	Weilun
Mold servo motor	MS1HG1-17D15CD	17kw	1	Huichuan
Rear material pulling power servo motor	MS1H3-18C15CD	1.8kw	2	Huichuan
Side sealing motor	MS1HI-10C30CB	1.0KW	2	Huichuan
Side insert servo motor	MSIHI-10C30CB-T331Z	1.0KW	4	Huichuan
Bottom insert up down servo motor	MSIHI-10C30CB-T331Z	1.0KW	2	Huichuan
Bottom drag power servo motor	MSIHI-10C30CB-T331Z	1.0kw	1	Huichuan
Lapping and gluing servo motor	0.4KW	0.4KW	2	Huichuan
Edge bonding module motor			2	Huichuan
Bag removal motor	FHB31118（220VAC）	1.2KW	4	Huichuan
Bagging displacement	FHB3913-H(220VAC)	1.2KW	4	Huichuan
Bottom support front and rear motors			2	Huichuan
Feeder servo motor	MS1H3-13C15CD	1.3KW	1	Huichuan
Patchmodule	MSW45-220-L45-ML-400		2	MROSH
Patch motor	MSIH1-40B30CB	0.4KW	2	Huichuan
Patch feeding motor	MSIH1-10C30CB	1.0KW	2	Huichuan
Mouth folding motor	MSIH1-10C30CB	1.0KW	2	Huichuan
Patching folding and pulling motor	MS1H3-18C15CD	1.8KW	2	Huichuan
Feeder feeding deceleration motor	GV32（1:200）	0.75KW	2	Taili
Feeder limit switch	YBLX-ME/8108		4	CHNT
Feeder vacuum pump	W2B25-P-V/VB	0.75KW	1	YUNWANG
Transducer	E4-1.0G-2.2P-S2-B3	1.0KW	2	Best
Feeder feeding and suction ancient fan		0.55KW	1
Guling machine	4 heads		2	NOKDSON
Feeder pressure plate	SDA25*25B		2	Airtac
Patchpressure plate	TCL10*36S		2	Airtac
Folding pressure plate	SDA25*25B		4	Airtac
Patch air cylinder	TCL16*50		6	Airtac
Patch baffle	32*40		4	Airtac
Patch grabbing cylinder			4	Airtac
Vacuum emission cylinder	ZU07S		12	Airtac
Folding baffle left and right	0CKR25*10S		4	Airtac
Patchpulling guide rail	HGW20CA		2	Shangyin
Folding displacement motor	FH133913H	3A	2	Mige
Patch scissors	MAL20*20CA		2
Servo driver	SV660AS7R6L	1.0KW		Huichuan
Servo driver	SV660PT8R4L	2.0KW		Huichuan
Servo driver	SV630ASZR8L	0.4KW		Huichuan
Stepper driver	3D722-D20
Grasping air cylinder	SDA32-20B		2
Edge sealing buffer cylinder	SDA50-25		6
Bag removal cylinder	TCL16*50		1
Sensor	KL-05NE		26
The main electrical appliances are Panasonic, Huichuan, etc. from Japan All optional items need to be quoted separately

1. How many workers needed for one machine?
Normal two workers,one is operator, another is packer.

2. How long is the machine warranty?

Warranty period for the delivered equipment will be 12month after completion of erection but not later than 18months after shipment. In case any item proves to be defective and the damage is confirmed by seller's technicians within this period, the seller will at their choice either send engineer to repair or supply a new one for replacement free of charge on the basis of CNF delivery.

3. Will you send your engineer to our factory?
Under normal circumstances, engineers can be sent out to install machine. If there is an epidemic, they will not be dispatched.hope you understand Based on the current epidemic ,we prepared many works.Our machines have Internet of Things,we install camera on machines to help our customers to install and run machines from our factory .And there are machine manual book and videos even can call our old local customers to come to help and support our customers if our engineers cannot be dispatched.

4. What should we charge for your engineer?
The buyer should cover engineer's salary, visa cost, Round air tickets, accommodations, transportation in buyer's country, food, medical care, safety cost, and related cost happens in buyer's country. Also, the buyer should prepare enough labor, electric wire outside the control panel and tools for installation. And salary is USD 80/day, depending on how the engineer make you satisfied. The date he arrives and leaves shall be counted as paid day.

5. How many days for finishing installation after engineer come to our factory?
The seller will send 1 engineer to install, test the production line and train customer's workers at buyer's factory. It will take 12 days for the whole installation and training.

6. Can your engineers understand English?
Our engineers understand a little English. All of our engineers have more than five years experiences on machine's installation. In addition, they can use body language to communicate with customers.

7. How do we solve the machine problem after your engineer leaving?
Normally,there will be no problem after finish installing. In case you have any problem,you can contact our after sales specialist at any time.Our after-sales department with 30 engineers.Our engineers will take a solution video according your description.

8. If the sizes that I want your standard machine can not make ,can you customize the machine what I want?
Yes.Our machines could be customized after we getting full communications

Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at zw1@china-zhengwei.comor use the following enquiry form. Our sales representative will contact you soon. Thank you for your interest in our products.

* Title:

* Name:

* Tel:

* E-mail:

* Country:

* Content:

Related Products

Luxury Bags

Food Bags

Flexo Printing

ZW-A8 Bag Making Machine

ZW-A12 Automatic sheets feeding paper bag making machine